The TORCH+ is an easy-to-use, powerful disinfection system designed for use in any healthcare, pharmaceutical, manufacturing, laboratory, or research setting. It is used to provide a rapid and highly effective method to disinfect surfaces, components, and common touch points to reduce the transfer of dangerous pathogens.
The TORCH+ contains eight high powered UV-C lamps to provide quick disinfection times. It's low power consumption allows
it to plug into any standard wall outlet. The TORCH+ produces an efficient UVC output of 12 mJ/minute (200 μw/cm2) to get a calculated
99% reduction of MRSA in 10 seconds. A 99% reduction of spores like Clostridium difficile can be achieved in 5 minutes within a distance of 10 feet. A recent study shows that
traditional UV systems such as the TORCH+ provide similar results as expensive Pulsed Xenon Ultraviolet Light Systems.
Click here to read the full study
The TORCH+ is loaded with features to make it simple to use and manage. Disinfection cycles can be controled based on time or accumulated UV dosage using the integrated UV sensor. The Torch+ comes with an iPadTM to use for operation and remote monitoring. Data recording and management is easy and efficient as well, with data stored on the iPadTM and emailed to a supervisor at the end of every cycle. Integrated motion sensors provide 360o coverage of the surrounding area to abort the cycle if motion is detected.
Download the TORCH+ Brochure
Download the Torch+ Data Sheet for more features, specs and info on the Torch+
Download the UV-C Disinfection Data Sheet
The TORCH+ outputs UVC light at 200 μw/cm2 (12 mJ/min) to provide rapid disinfection.
The TORCH+ can be plugged into any standard 115 VAC outlet.
The integrated UV sensor logs the total UV dosage for the cycle.
The TORCH+ comes with an iPadTM which allows you to control and monitor cycles from anywhere.
Cycle Data is stored on the iPadTM and emailed to a supervisor after each use.
Cycle data includes:
- Room Number
- Operator Name
- Accumulated UV Dosage
- Any alarms that occurred
The TORCH+ has four built-in motion sensors to provide 360o coverage which will abort the UV cycle if any motion is detected
at 10 ft
|Dimensions||23" W x 68" H x 23" D
(58 cm x 173 cm x 58 cm)
|Weight||72 lbs. (33 kg)|
|Power||110-240 VAC, 6 Amps, 50/60 Hz|
Watch the video below to see how the TORCH+ works